4 Ways to Clean Your Carpets

Published On:

By JoePirest

For the sake of making your home all crisp and clean, you need to give heavy amount of attention to Carpet Cleaning job. You might be wondering which are easy to follow ways to clean your carpets. Below you check out the explanation.

It is very important for you to keep your rugs and floor coverings clean so that a peaceful atmosphere free from all allergens can be seen in your home.

Vacuuming your rugs and carpets

To clean your carpets, you can go with the vacuuming method. Do this job with the help of a vacuum cleaner.

Most importantly, with the help of a vacuum cleaner, you can even clean and remove all dust present on the blinds, furniture and windowsills, and baseboards.

Use a nozzle attachment so that you can clean the edges of the carpets. It is on these sections that dust is often and frequently collected.

Moreover, vacuum your carpet or floor covering both in the horizontal direction and also in the vertical direction. It is observed that carpet fibers are difficult to clean. So make sure that you vacuum and clean them in a thorough manner.

If you want to know how “regularly” you should vacuum your carpet, then we can give you an idea about this aspect. It is recommended and advised to vacuum at least once a week if a single person lives in a home.

On the other hand, if a couple lives along with their two cats, then they should vacuum their carpets and rugs three times a week. Vacuuming your carpets is going to remove hair and all dander.

Lastly, if your carpets and rugs remain visibly soiled with grease, grime and dirt or even with pet hair, then you have to vacuum more often.

Spot Cleaning

The next easy and super convenient to follow way to clean your rugs, it is done by spot cleaning. Just take a clean white cloth. You need to dry all fresh stains present on your carpets by using a clean white cloth.

You can even use an additional white cloth if you want to remove the rest of the stains which are left behind after you are done with your blot job.

Avoid using any sort of bristles or brushes. They can damage the carpet fibers. Moreover, get hold of the right and appropriate carpet cleaner.

Before you use that carpet cleaner, make sure that you test the product on a small section part of the carpet.

Do follow all of the directions written and mentioned on the bottle. Lastly, let your carpet dry completely and enjoy getting a crisp clean looking carpet.

And with respect to rinsing your carpet, you should always use fresh clean white cloth and clean water.

And never soak your whole carpet with water. By doing so, your carpet is going to absorb excess amount of water. And this lead to lots of issues and problems like that of mold and mildew growth.

Just let that area to get air dry completely. If you used a large amount of water, then what you can do is run a fan or you can also use some specialty carpet dryer so that your carpet can get dry more quickly.

Shampooing You Rugs, Floor Coverings and Carpets

In addition to, you can give a complete cleaning job to your carpet by shampooing it. You can buy a carpet shampooer or have it on rent. There are a large number of hardware stores which do offer such carpet shampooer cleaners.

The very first step which you have to follow is to prepare and make the solution according to the guidelines and directions written on the bottle. Pour that solution in that carpet shampooer cleaner. Push the machine forward so that all solution can be laid down on the carpet.

After that, you can pull back the machine so that remaining water can be sucked up. Let your carpet dry and in a few hours, you can then have a clean and stain-free carpet in your room.

If you notice that shampoo is still there and left behind in your carpet, then you can consider this fact of cleaning your carpet or rug again.

If soap or any shampoo will remain to stay in your carpet, then there are heavy chances that the carpet will attract more dirt and grease. So, make sure to thoroughly remove the shampoo or soap from your rug. You can make a mixture of white vinegar and water.

Pour that solution in the machine and do the process one more time. The presence of vinegar is going to remove any of the lingering detergent residue which got stuck in your carpet.

Applying odor removal mixture on Your Carpets

The last method which you can follow to clean your carpets, it is done by applying odor removal mixture on them.

By doing, all bad smell and odors will come out from your rugs and floor coverings. Most probably, you can make this odor removal mixture with the help of a few of the ingredients. Take a bowl and add 1 cup of borax.

It is easily available at hardware stores. Then add 2 cups of cornmeal and 1/2 cup of baking soda. Besides, this effective method has the potential to treat all sorts of stains and smelly odors residing on your carpet.

Even more, you can make a solution consisting of vinegar and water. This mixture and effective solution prevent all sorts of mild growth on carpets and rugs.

Hence, make sure to keep and maintain your home as much clean looking as you can. And your very first job starts from carpets and rugs cleaning area.

So, take out all dirty rugs from your rooms and give them a cleaning job like you have never done before.

Conclusion

So, what’s the bottom line? Keep your carpets, rugs and floor coverings all clean by following the above-mentioned ways.

You can share with us what ways and measures you follow to keep your home carpets clean. Share those tips with us on this platform.

About JoePirest

Joe Pirest is an excellent writer who wants to keep sharing knowledge and experiences through written words.

Leave a Comment